Nissan Air Flow Meter Navara Pathfinder Murano X-Trail Qashqai NP300 2.5 DCi OE 22680-7S00A in Randburg, Gauteng for sale

Nissan Air Flow Meter Navara Pathfinder Murano X-Trail Qashqai NP300 2.5 DCi
OE 22680-7S00A
Delivery Nationwide - Door to Door
This is a brand new, affordable OE Specification aftermarket replacement product. 100% Factory tested and built to strict quality control standard to ensure high performance and guaranteed to deliver better fuel economy.
Description
An Air Flow Meter measures the amount of air and in some cases the volume of air going into the chambers of the engine. The ECU then electronically administers the correct amount of fuel to the cylinder ports. A critical component for engine performance and power, the MAF measures the flow and density of air into the combustion chamber of the engine. The resulting voltage tells the vehicle computer to adjust the injector pulse to change the amount of fuel delivered. If the MAF fails, the vehicle will not run correctly.
Defective Symptoms
The most obvious symptom of MAF failure is a "check engine light" lit on the vehicle dashboard. The MAF determines the mixture of air and fuel required for engine performance. So, MAF failure will create a wide variety of performance and power problems. These may include: hard to start vehicle; starts and immediately stalls; hesitation in engine; rough idle; running very rich or very lean fuel mixture; or "hiccup" when accelerating. These symptoms can appear before the MAF fails to the degree that the check engine light appears. 
Technical Specification
OE Numbers used for reference purposes only
OE 22680-7S00A
OE 226807S00A
AFH70M-38
AFH70M38 AFH-70M38
OE 22680-7S000
OE 226807S000
OE 22680-AW400
OE 22680AW400
Suitable Replacement for - (Including International Vehicles)
Nissan Navara 2.5 dCi 2005 onwards
Nissan Navara 4.0L V6
Nissan Pathfinder 2.5 dCi 2005 onwards
Nissan Qashqai 2007 onwards 2.0L 2.0 dCi
Nissan X-Trail 2.0L 2.5L 2.0 dCi
Nissan NP300 2008 onwards 2.5 dCi
Nissan Murano 2005 onwards
Shipping Information
Ships via Berco - Door to Door - R 99.00
International Buyers, please ask for shipping quotation first.
Guarantee / Returns
Electrical items have a limited guarantee. Fitment must be carried out by an accredited repair centre, e.g. RMI accreditation
Returns are permitted within guarantee period. Buyer must obtain reference number before returning.
Food for Thought
An air flow meter is used in some automobiles to measure the quantity of air going into the internal combustion engine. All modern electronically controlled diesel engines use air flow meter, as it is the only possible means of determining the air intake for them. In the case of a petrol engine, the electronic control unit (ECU) then calculates how much fuel is needed to inject into the cylinder ports. In the diesel engine, the ECU meters the fuel through the injectors into the engines cylinders during the compression stroke.
The vane (flap) type air flow meters (Bosch L-Jetronic and early Motronic EFI systems or Hitachi) actually measure air volume, whereas the later "hot wire" and "hot film" air mass meters measure speed of air flow.
The flap type meter includes a spring which returns the internal flap to the initial position. Sometimes if the spring is tensioned too tight, it can cause restrict the incoming air and it would cause the intake air speed to increase when not opened fully.
Differential pressure is also used for air flow measurement purposes.
Failures
Air flow meters may fail or wear out. When this happens, engine performance will often decrease significantly, engine emissions will be greatly increased, and usually the Malfunction Indicator Lamp (MIL) will illuminate. In most countries in Europe, and in places in the United States where emissions inspections are obligatory, a lit MIL is cause for a vehicle to fail the inspection. Some engines do not idle with an air flow meter failure.
Tags
nissan dCi air flow meter, navara np300 pathfinder air flow meter, x-trail qashqai murano air flow meter, 22680-7s00a